Product Profile of Jelly Filled And Dry Core Aerial Copper Cables
U M Cables Limited offers Jelly Filled and Dry Core Aerial Copper Cables. U M Cables Limited is ISO 9001:2008 and 14001:2004 certified. The Jelly Filled and Dry Core Aerial Copper Cables are telecommunication cables available in a range of sizes from 5 Pairs to 2400 Pairs, and in conductor diameter from 0.4 to 0.9 mm.
Key Features of Jelly Filled And Dry Core Aerial Copper Cables
- Insulation: Solid [MDPE/ HDPE]
- Spark Test: 3 KV RMS AC, 1 Spark per 5 k.m.
- Retraction of Insulation [shall not exceed]: 2.5 mm after 1 min.
- Resistance to Compression: 200 N, 12 V DC
- Insulation Resistance at 500V: 5000 Mega Ohm Km.
- Construction: 10/20 Pair units & 50/100 pair super
- Filling Compound: Water Resistant Compound [Petro Jelly]
- Core wrap: Polyester tape
- Moisture Barrier: Poly Aluminium
- Sheath / Jacket: LDPE
- Armouring: Galvanized Steel Tape
- Armouring Bedding: PE Tape
Product Specification of Jelly Filled And Dry Core Aerial Copper Cables
- Attenuation:12, 8.25, 6.3, 4.4 (at 150 Khz (db/km) shall not exceed)
- Average:52 ½ 3
- Conductor Elongation:15, 18 (minimum%)
- Far End Cross Talk:Better than 67.8 RMS indvl. 55 RMS ((db) at 150 khz)
- Near End Cross talk:Better than 55 RMS (individual value) ((db) at 150 khz)
- Pairs:From 5 pair to 2400 pairs
- Resistance to Compression:200 N, 12 V DC
- Retraction of Insulation:2.5 mm after 1 min.
- Spark Test:3 KV RMS AC, 1 Spark per 5 k.m.
