Product Profile of Dual-Channel Vibration Monitoring Meter
Toshniwal Industries Pvt. Ltd. Manufactures Dual-Channel Vibration Monitoring Meter. Toshniwal Industries Pvt. Ltd. Is an ISO 9001:2000 certified company. The Dual-Channel Vibration Monitoring Meter can monitor the radial vibration to a high level of accuracy, predict the vibration increment caused by unbalance, misalignment, part loose and provides comprehensive protection for generating units. The recorded outputs can be stored as analog signals and RS-485 communication interface is also provided.
Key Features of Dual-Channel Vibration Monitoring Meter
- EN2000A1 vibration monitoring device can receive the signals from two sensors [eddy current sensor or velocity sensor].
- The vibration can be monitored continuously by two separate channels and the parameters of each channel can be configured independently as required.
- RS-485 communication interface is provided and multi-machine communication is supported, facilitating the networked management of multiple meters.
- The parameter setup or function selection of the meter can be undertaken using the buttons on the front panel or by communication with the central server computer, and password is needed for administration authority.
- Turbine generator,
- Hydro-generator
- Fan,
- Compressor,
- Motor,
- Pump, etc.
Product Specification of Dual-Channel Vibration Monitoring Meter
- Dimensions:>160mm(width) × 80mm(height) ×120mm(depth)
Casing Size-152mm width ×76mm height
- Measuring Range:Eddy current sensor: 0-999µm P-P value
Speed Sensor: 0-50.0 mm/s(RMS value), 0-500µm P-P value
Acceleration sensor: 0-100 mm/s, 0-200m/s2
peed Sensor: ±0.2% FS±1 Character
- Number of Channels:2 Channel.
- Input Impedance:>50KΩ
- Output Mode:0-10mA/4-20mA/0-20mA
- Alarm:2 alarm set points
Alarm setting point: 0-100 FS
Alarm Delay: 0-9 Seconds
Alarm reset: self-locking and automatic reset
- Relay Capacity:250VAC/1A or 30VDC/2A
- Communication:RS485
- Humidity:0-50 Humidity ≤85%, No dew
- Installation Mode:Card Dish Pack
- Operation Power:110-200VAC/50-60Hz or 24-32VDC
- Power Consumption:≤10W
