Product Profile of 6KV Surge Comparison Tester with Bar-to-Bar Test

The 6KV Surge Comparison Tester with Bar-to-Bar Test is a comprehensive tester to check the quality of armatures, field & pole coils. It uses the bar-to-bar test method in order to eliminate the limitation of span test method to test the low impedance of the series wound armatures. The peak voltage of the waveform is observed on the CRT as the test head is moved across the commutator of the armature. In case of shorted pair of bars the waveform will reduce in amplitude and distortion can also been seen. Jabbals manufactures 6KV Surge Comparison Tester with Bar-to-Bar Test.

Jabbals supplies Surge Comparison Tester, Automatic Sequential Analyzer, Automatic Safety analyzer, Automatic fan analyzer, Automatic Rotor tester and DC Hi-pot tester. The 6KV Surge Comparison Tester with Bar-to-Bar Test is user friendly front panel controls. This tester has highly sensitive fault detection capability. It detects even a single turn short in the coil.

Benefits of 6KV Surge Comparison Tester with Bar-to-Bar Test are:

• Armature bar-to-bar test by hand operated probe

• Higher current capabilities of bar-to-bar test allow the detection of a TIG weld short through & riser high resistance joints

• 3½ Digits LED Display to display the applied bar-to-bar surge voltage and reference voltage across adjacent commutator bars

• Test leads insulated to 45KV rating

• Leads energized warning indicator

• Bright sharp CRT display to analyze the faults easily

• 1phase/3phase Test Select Switch

• Footswitch for hands free operation