Product Profile of Bitumen Ductility Testing Apparatus
Bitumen Ductility Testing Apparatus consists of a water bath with a thermostatic heater and a circulating pump to maintain uniform water temperature. The Ductility Testing Apparatus is designed with rotating type gears and motors housed in a cabinet fixed above the other end of the bath. The Ductility Testing Apparatus has the inner water bath made of stainless steel and is insulated to ensure safety operation. The Bitumen Ductility Testing Apparatus is equipped with control switches for motor, stirrer; heater and indicator lamps fixed at a convenient place on the water bath.
Key Features of Bitumen Ductility Testing Apparatus
- Consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature.
- One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch.
- The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath.
- A pointer fixed to the carrier moves over a scale graduated fixed on the bath towards the fixed plate side.
- The rotating shaft has 2 speeds of travel for the bracket, 5cm/min and 1 cm/min, selected by a clutch.
- Water bath inside is Stainless Steel; it is an insulated water bath.
- A heater with thermostatic control is fixed inside the water bath.
- Control switches for motor, stirrer; heater and indicator lamps are fixed at a convenient place on the water bath.
- Complete with three briquette moulds and one base plate, all made of brass.
- Operates on 230 volts A.C. single phase.
