www.jimtrade.com
Menu

Dtrans Az 01 Indicator / Controller For Analytical Measurement With Bezel Size 96 X 48Mm

Dtrans Az 01 Indicator / Controller For Analytical Measurement With Bezel Size 96 X 48Mm

Product Category :    Electronic Indicators

Supplier                :    Jumo India Pvt. Ltd.

Inquire Now
Product Profile of Dtrans Az 01 Indicator / Controller For Analytical Measurement With Bezel Size 96 X 48mm

Jumo India Pvt Ltd manufactures dTRANS Az 01 Indicator / Controller for Analytical Measurement with Bezel Size 96 x 48mm. Jumo India Pvt Ltd is DIN EN ISO 9001 and DIN EN ISO 14001 certified company. The dTRANS Az 01 Indicator / Controller for Analytical Measurement with Bezel Size 96 x 48mm visualizes and controls variables in analytical measurement [pH value, redox voltage, conductivity, high-purity water, oxygen, free chlorine, chlorine dioxide, ozone etc.]. The indicator has two analog and two logic inputs. The first analog input is suitable for connecting a 0[4]-20 mA signal, which can be provided by any type of transmitter [including 2-wire types]. The input signal is conditioned, as determined by the configuration, and displayed. One special feature of the instrument is that the calibration procedures for pH, redox and conductivity are internally programmed. The second analog input can be used to connect Pt100 or Pt1000 resistance thermometers. The instrument features two 4-digit 7-segment displays for indicating the main variable [red] and the temperature [green]. The temperature display is switched off in the default setting. A separate temperature sensor [Pt100 or Pt1000] can be connected to the second analog input.

This dTRANS Az 01 Indicator / Controller for Analytical Measurement with Bezel Size 96 x 48mm can then be used to display the temperature of the medium and, if required, monitor it by means of a limit switch. During programming, the displays provide comments on the inputs. A great variety of control tasks can be handled by the various output options [relay contacts and / or analog outputs]. The two relay "make" contacts that are provided on the instrument as standard can be configured as a limit controller and / or pulse width or pulse frequency controllers, or as a modulating controller. To obtain analog [continuous] controller outputs, the optional analog outputs must be configured accordingly. All controller outputs can be configured for a P, PI, PD or PID control action.

Specifications of the dTRANS Az 01 Indicator / Controller for Analytical Measurement with Bezel Size 96 x 48mm are as follows:

  • Panel-mounting unit, just 96 x 48 x 110 mm.
  • Display of pH, mV, µS/cm, mS/cm, mg/l, etc and 2 logic inputs.
  • 2 isolated process value outputs 0[4] - 20 mA / 0[2] - 10 V, freely selectable and scalable for the main variable or temperature, or proportional controller [option]
  • 2 relays as standard, freely programmable as limit controller or P, PI, PID, PD controller with pulse width or pulse frequency output, or as modulating controller
  • OPTION: Profibus-DP or serial interface RS485 /422 with MODbus /Jbus protocol
  • Protection IP65
  • Wall-mounting housing, Protection IP65
Recently Updated Products



Industrial Grade Electronic Indicator
Industrial Grade Electronic Indicator
Supplier    :    Syslab Automation Pvt Ltd
Inquire Now
Top Mounted Level Indicator
Top Mounted Level Indicator
Supplier    :    Teleflo India Private Limited
Inquire Now
Three Phase Rotation Indicator
Three Phase Rotation Indicator
Supplier    :    Ttl India Pvt. Ltd.
Inquire Now
Battery Discharge Indicator with Voltage Selection Option
Battery Discharge Indicator with Voltage Selection Option
Supplier    :    Dewag Electronics Pvt Ltd
Inquire Now