Product Profile of Automatic Mains Failure Control Panel
Automatic Mains Failure Control Panel is provided with indicators on load-on DG, load on mains, fault indications, LLOP, high water temperature / high cylinder head temperature and overload. The Mains Failure Control Panel is meticulously wired and is available in dust and vermin proof construction. Ramp Elmech Engineers offers Automatic Mains Failure Control Panel.
Ramp Elmech Engineers supplies a wide range of diesel generating sets, power control panels, auto main failure panels and sound proof canopies for various industrial applications. The Automatic Mains Failure Control Panel comes fabricated from CRCA Sheet steel of 16 SWG thickness and is suitable for 240/415V, Single/three phase, 2/4 wire 50 Hz. AC supply.
Key Features of Automatic Mains Failure Control Panel
- A power circuit consisting of Contactor, MCB and Fuses.
- Automatic start/ stop of the Genset in case of AC mains` failure and its restoration respectively.
- Manual start/stop facility also provided.
- Mains failure: 3-attempt engine cranking after mains failure otherwise the engine fails to start.
- Engine starts-up within 8 sec. of mains failure otherwise 2 more start pulses after every 8-9 seconds.
- Unhealthy mains: Any of the phase failure or voltage drops below set value.
- Mains restoration: Engine keeps running for 30 seconds before stopping.
- One Ammeter with CTs & Selector switch, One Frequency meter, One Voltmeter with selector switch and one Hour meter.
- Set of indications: Load on DG, Load on mains, Fault indications, LLOP, High Water Temperature / High cylinder head temperature and Overload.
- Set of Push Buttons: Engine start / stop, Alarm acknowledge button for Hooter, Reset button for fault indications.
- Safety: High Water Temperature, LLOP and Overload Trip.
- A separate battery charger for continuous charging of batteries in trickle/boost mode to ensure trouble free starting of the engine.
