Product Profile of Single Pocket Water Tester Instrument Machine

Cantech Machines offers Single Pocket Water Tester Instrument Machine. Cantech Machines offers different ranges of Can Seaming Machines such as 4 DS Seamer, 1A DS Seamer, 1A Body Reformer, 1A Hand Flanger, CM 510 Body Beader, 1A Flange Rectifier, 1A Treadle Embossing Press and Testing Equipments. Single Pocket Water Tester Instrument Machine equipment is used for testing cans by compressed air for possible leaks after the body has been reformed, flanged end one and seamed on. The can to be tested is placed on the adjustable support prongs with the flanged or open end against the rubber pad, and the foot pedal is depressed. This clamps the can and admits air to a predetermined pressure, while immersing the can in the water tank, Air bubbles observed at this are a clear indication of a leak.

Specifications of the Single Pocket Water Tester Instrument Machine includes -

• Air pressure can be controlled by setting the reduction value at 5, 10 or 15 psi [as required]; Machines fabricated for users operating without central, compressed air supply are supplied without air pressure reduction values. Instead, these are fitted with a foot pump which can be manually operated to give up 40 psi pressure.

• Pressure scale maximum: 30 psi / 177.8 mm

• Vacuum scale minimum: 30" / 54 mm

• Height: 6 5/8" 167 mm

• Width: 3 5/8" 92 mm

• Length: 1.34" 34 mm

• Net weight: 1.85 lbs 0.84 mm

• Shipping weight: 4 lbs 1.81 mm