The Cyclone Separator Machine finds applications in various industries like Iron and Steel, Mining and Industrial Minerals, FMCG, Coal, etc. In the machine, dust laden gas or air enters the collector tangentially and follows a spiral path to the bottom of the cone. The centrifugal force created by the circular flow throws the dust particles toward the wall of the cyclone. After striking the wall, the combination of the gravitational and swirling forces causes the dust to move downward to the dust outlet. Pressure drop for normal operation is about 3 – 4 inches of water. They are very efficient in collecting dust particles down to 30 microns in size. Efficiency of the equipment depends on the material being conveyed, material/air flow rates, and cyclone design. Depending upon the application, cyclone separator can be designed in single, twin and quad arrangement and multiclone. Karyasiddhi Blower Systems Pvt. Ltd. Manufactures Cyclone Separator Machine.
Karyasiddhi Blower Systems Pvt. Ltd., an ISO 9001:2000 certified company that offers Dust Collection System, Dust Scrubbing System, Fume Exhaust System, Fume Scrubbing System, HVAC System, Clean Room System, Humidification System, Pneumatic Conveying System and Effluent Treatment Plant. The Cyclone Separator Machine consists of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure. The machine operates on the same principle as cyclones--creating a main downward vortex and an ascending inner vortex. The Cyclone Separator Machine is more efficient than single cyclones because they are longer and smaller in diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of the dust particles. The pressure drop of the multiclone collectors is higher than that of single cyclone separators.
