Product Profile of Manual Oil and Grease Separator

Manual oil and grease separator is designed to segregate floating oil, fats and grease from water from the kitchen wastewater stream. Oil and grease separator is designed to be fitted under the sink for oil water separation or an open type with flow by gravity. Manual oil and grease separator has low height, designed to be placed under the sink or is an open type.

Key Features of Manual Oil and Grease Separator

• Size is 0.70Lx0.0.46Wx0.35mH
• Unit includes Oil and Grease Separator Tank, Synthesizer Media, Strainer Basket, Heater with Thermostat, Thrash Door, Drain Valve
• Drain valve under the system is manually operated and will let out accumulated sludge as required
• Oil content in the output water will be less than the permissible limit
• Oily water further enters the next chamber and flows up through the Claire Fontaine Synthesizer pack in which the particles stick to it
• In the Claire Fontaine Synthesizer pack, oil grows in to bigger droplets that migrate to the tank top and are continuously evacuated out by the manual oil evacuation unit
• Before oil is evacuated, heater is switched on to ensure that oil liquefies
• Oil free water, then moves to the last chamber and exits the system
• Due to the baffles in the system, at low flows, oil will remain within the baffle walls and will not flow outside
• Designed to be fitted under the sink for oil water separation or an open type with flow by gravity
• Designed to segregate floating oil, fats and grease from water from the kitchen wastewater stream
• Has low height, designed to be placed under the sink or is an open type
• De-oiled clean water maybe let out into the drain or to the sewage treatment plant
• Separated oil is to be collected in a container for disposal via an evacuation system of a tap from OGT
• Solids can be strained in 250 micron SS strainer before it enter the OGT
• Claire Fontaine Synthesizer mesh is a wash and reuse type
• Immersion heater is provided to thin out the oils and water for faster separation with a thermostat control with starters
• System is divided into several chambers for oil separation in a limited space
• Oily water with the thrash from the existing separator is pumped in to the strainer basket where solids are captured in the SS strainer. By removing the strainer basket, the thrash can be removed physically