Product Profile of Manifold Mounted Pressure Filter
Internormen Filters Private Ltd. Supplies Manifold Mounted Pressure Filter. Internormen Filters Private Ltd. Is an ISO 9001: 2000 recognised company manufacturing a wide range of filters for hydraulic and lubricating fluids and contamination monitoring system. The Manifold Mounted Pressure Filter of model number MF 30 and MFO 30 is suitable for a working pressure up to 160 bar and comes with star-shaped or pleated filter material. The Manifold Mounted Pressure Filter is used for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils.
Key Features of Manifold Mounted Pressure Filter
- The pressure peaks are absorbed by a sufficient margin of safety.
- The filters are flange mounted to the hydraulic system.
- The filter element consists of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive.
- The flow direction is from outside to inside.
- Filter elements are available down to 4 µn; m[c].
- High intrinsic stability and good filtration capability
- A high dirt retaining capacity
- Long service life.
- Available up to a pressure difference resistance of δp 160 bar
- Rupture strength of δp 250 bar.
Product Specification of Manifold Mounted Pressure Filter
- Max. Operating Pressure:160
- Test Pressure:208
- Tank volume:0, 1 l
- Temperature Range:-10 to +80 (for a short time +100)
