Machinery and spares offers different kinds of press brake. As a part of that sew synchronised cnc press brakes are designed and engineered to a high degree of reliability. It is the advanced forming machine to integrate with today`s modern production technology. Salient features are:
1. the epb series press brake has a solid and rigid frame designed to ensure minimum deflection under heavy loads.
2. the position of the press beam continuously monitored by a measuring system.
3. the measuring system consists of a transducer mounted on a separate measuring which is fixed to the machine table.
4. the electronic scales, which are fixed to the press beam on either side of the press, provide a continuous feed back to the cnc controller about the actual position of the press beam relative to the table.
5. the transducer is fitted to a separate measuring frame hence the scale read are totally unaffected by the actual load on the frame.
6. the parallelism and the penetration of upper tool in the die is accurate +/-0.01 mm irrespective of the actual load on machine.
7. the electronic monitoring system allows repeatability of successive strokes within the same accuracy. This feature also allows correction of the y-axis under full pressure as in bending.
8. eccentric load, while bending short sheet off the centre of the machine, does not affect the quality or accuracy of the press.
9. the use of proportional hydraulics ensures exact force required by the job, as calculated by the cnc controller, is exerted. Thereby resulting in power saving.
