www.jimtrade.com
Menu

Sealing Rings With Hardness 40-90 Degree A

Sealing Rings With Hardness 40-90 Degree A

Product Category :    Sealing Rings

Supplier                :    Deshmukh Rubber Works Pvt. Ltd.

Key Features of Sealing Rings with Hardness 40-90 Degree A

  • Size Existing Range: ID 1-250mm, CS 1-10mm
  • Hardness: 40-90 Degree A
  • Tensile Strength Kg/sq cm: 50-200% Kg/sq cm Depending on hardness & Polymer, or beyond above range as per customer`s requirement


Inquire Now
Product Profile of Sealing Rings with Hardness 40-90 Degree A

Deshmukh Rubber Works Pvt. Ltd. Offers Sealing Rings with Hardness 40-90 Degree A. Deshmukh Rubber Works Pvt. Ltd. Is an ISO 9002/1994 registered organization that manufactures moulded rubber parts like sealing rings, bellows, couplings, gaskets, impellers, tubing, antivibration mountings, bushes, dust covers, hoses, diaphragms, grommets, washers and "O" rings. The Sealing Rings with Hardness 40-90 Degree A is used as a seal for two fixed or moving surfaces. The sealing rings are available in polymers like Natural, Nitrile, Neoprene, Silicon, SBR, EPDM, HNBR and Viton Rubbers

Key Features of Sealing Rings with Hardness 40-90 Degree A
  • Size Existing Range: ID 1-250mm, CS 1-10mm
  • Hardness: 40-90 Degree A
  • Tensile Strength Kg/sq cm: 50-200% Kg/sq cm Depending on hardness & Polymer, or beyond above range as per customer`s requirement
  • Elongation: 150-500% Depending on hardness & Polymer, or beyond above range as per customer`s requirement
  • Compression set: 15-40% Depending on hardness & Polymer, or beyond above range as per customer`s requirement
  • Finish / Colours: Black or any other color. Glossy or as specified
Product Specification of Sealing Rings with Hardness 40-90 Degree A
  • Elongation:150-500% Depending on hardness & Polymer, or beyond above range as per customer requirement
  • Hardness:40-90°A
  • Size:ID 1-250mm, CS 1-10mm
  • Tensile Strength:50-200% Kg/cm2 Depending on hardness & Polymer, or beyond above range as per customer requirement
  • Compression Set:15-40% Depending on hardness & Polymer, or beyond above range as per customer requirement
  • Finish:Glossy or as specified
  • Colour:Black or any other color
Recently Updated Products



Corrosion Resistant Carbon Sealing Rings
Corrosion Resistant Carbon Sealing Rings
Supplier    :    V. S. K. Shaft Sealing System
Inquire Now
Corrosion Proof Carbon Ring
Corrosion Proof Carbon Ring
Supplier    :    J & I Industries
Inquire Now
Split Carbon Seal Rings
Split Carbon Seal Rings
Supplier    :    Senaa Engineering
Inquire Now
Silicon Carbide Seal Rings
Silicon Carbide Seal Rings
Supplier    :    Senaa Engineering
Inquire Now
Industrial Carbon Sealing Rings
Industrial Carbon Sealing Rings
Supplier    :    Senaa Engineering
Inquire Now