Product Profile of Direct Mount Electric Non-Spring Return Actuator
Johnson Controls [India] Pvt. Ltd supplies Direct Mount Electric Non-Spring Return Actuator. Johnson Controls [India] Pvt. Ltd offers various types of automotive interior products and electronic system etc. Direct Mount Electric Non-Spring Return Actuator is available in two types, require an AC 24 V input signal and are compatible with a variety of VAV and VVT controllers. This Direct Mount Electric Non-Spring Return Actuator is available with an integrated 48 in. [1.2 m] long cable. Direct Mount Electric Non-Spring Return Actuator is easy to install.
Direct Mount Electric Non-Spring Return Actuator has the following features:
- Direct mount, non-spring return type in nature
- Operate on AC 24 V power and use plenum cables for field wiring.
- Provide a running torque of 18 lb in [2 Nm], and the nominal travel time is 30 seconds at 60 Hz
Product Specification of Direct Mount Electric Non-Spring Return Actuator
- Audible Noise:35 dBA Nominal at 39-13/32 in. (1 m)
- Control Type:Floating Control without Timeout, Floating or On/Off Control with Timeout, Proportional Control
- Enclosure:NEMA 2, IP42
- Models:(M910x-AGA-2S), (M9104-IGA-2S), (M9104-GGA-2S)
- Operating Temperature:-4 to 140°F (-20 to 60°C); 90% RH Maximum, Noncondensing
- Power Requirement:(AC 24 V +25% /-20% at 50/60 Hz, 2.1 VA, Class 2, Safety Extra-Low Voltage (SELV)), (AC 24 V + 25%/- 20% at 50/60 Hz, 3.0 VA, Class 2, SELV), (AC 24 V +25%/-20% at 50/60 Hz, 3.6 VA, Class 2, SELV (Class III))
- Rotation:93° ±3°, CW or CCW
- Storage Temperature:-20 to 150°F (-29 to 66°C); 90 RH Maximum, Noncondensing
