Coimbatore-based psg industrial institute manufactures pproduction lathecnc 150 is manufactured by coimbatore-based psg industrial institute. This production lathe is provided with built-in pendant station with crt display. Following are some of the technical features of this production lathe which include: this lathe is provided with high precision and high-speed main spindle; . The rigid slant bed [45 degree] of the unit is meant for efficient chip disposal and easier operation; . The anti-vibration mass technique leads to results in precision turning with excellent finish; h. The swing over bed of the machine covers 370 mm and the swing between centres is 175 mm. There are 8 numbers of tool positions are provided with tool shank size 20 mm x 20 mm. The maximum boring bar diameter is 32 mm. Following are some physical configurations of this production lathe which include: the dimension of the machine is 1.85 m x 1.5 m x 1.8 m and its weight is approximately 3,000 kgs; . The cnc system of the unit is fanuc type; . The spindle nose / taper is a25/mt5 with hole through spindle 40 mm; . The standard and optional spindle speed ranges are 303,000 and 606,000 rpm, respectively; . The power of spindle motor [cont./30 minute] is 5.5 / 7.5 kw. Production lathe is best suited suitable for the production of a variety of medium turned parts. Some standard accessories of the production lathemachine include coolant system and chip tray, machine cladding, built in work light, service tool kit and hydraulic tailstock with built-in revolving centre. Some general the machine specifications of this production lathe are as follows:* maximum turning diameter / length: 200 / 220 mm * distance between centres: 350 mm * maximum bar capacity [standard / optional]: 18 / 25 mm * chuck size: 165 mm * cross travel [x axis]: 135 mm * longitudinal travel [z axis]: 380 mm * rapid traverse rate x / z-axes: 10 / 10 m/min * feed rates [x and z axes]: 1-5,000 mm/min * quill diameter / stroke: 75 / 80 mm * quill taper: mt3
