Product Profile of Counter with Separate Set and Process Value Display
Electronic Automation [P] Ltd supplies Counter with Separate Set and Process Value Display. Electronic Automation [P] Ltd offers diverse types of electronic timer, monitoring device, power supplies, energy management systems, time switch, hour meters etc. Counter with Separate Set and Process Value Display is a device which stores [and sometimes displays] the number of times a particular event or process has occurred, often in relationship to a clock signal. Counter with Separate Set and Process Value Display is available in two models, comes with rear reset facility.
Key Features of Counter with Separate Set and Process Value Display
- Up counting with default hold facility.
- Separate set & process value display.
- Input signal from proximity Switch [NPN for H3CT & PNP /NPN for H3CT-5] and Limit switch.
- Rear reset facility provided.
- Memory retention in case of power failure
- Sensitivity [Time gap between 2 pulses] selectable between 1Hz to 100Hz.
Product Specification of Counter with Separate Set and Process Value Display
- Ambient Temperature:Operating:-10° C to +55° C
Storage: -25°C to +80°C
- Control Output:1 c/o rated for 5A @ 250V AC/28V DC resistive load
- Dimensions:48 x 48 x 105mm (W x H x D)
- Display:4 digit 7 segment LED, 0.28 Inches
- Electrical Connection:8 pin terminal block (H3D)
- Humidity:Max 85% RH @ 40°C
- Insulation Resistance:> 100M Ω @ 500V DC
- Models:H3CT
- Power Consumption:4VA/1W . AC Approx
- Range:0 - 9,999 counts
- Rated Frequency:50 Hz + 5%
- Recovery Time:Min 2 Sec
- Supply Voltage:85 - 270
