Product Profile of Automatic Static Power Factor Controller

Automatic Static Power Factor Controller has automation self-adjustment to any capacitor step value and allows manual switching of each capacitor steps. The Controller has digital indication of power factor preset parameters and specified installation data and no- volt release feature to instantly disconnect all capacitors if the power fails for more than 35 m seconds. The Automatic Static Power Factor Controller has digital setting of individual parameters including target power factor switching time, step limit etc and has the feature of elimination of defective capacitors and their indication.

Technical specifications of Automatic Static Power Factor Controller:

• Voltage: 300 to 460 volts, 50 Hz.

• Current: 5a or 1a selectable through dipswitch.

• Switching time: programmable.

• Temperature range: 0 to 50 ° C.




Key Features of Automatic Static Power Factor Controller

• Automation self-adjustment to any capacitor step value.
• Allows manual switching of each capacitor steps.
• Digital indication of power factor preset parameters and specified installation data.
• Digital setting of individual parameters including target power factor switching time, step limit etc.
• Elimination of defective capacitors and their indication.
• Digital reading facility of switching cycles per capacitor steps.
• Digital encoded reading of capacitor sizes.
• Visual display of harmonic overload alarm.
• Stage indication of steps switched in, as well as total banks in operation
• Easy plug-in back panel terminal connection.
• Protection against capacitor over-current, due to over-voltage, short-circuit, system resonance and presence of higher value of harmonics in the system.