Eddycranes Engineers Pvt. Ltd offers Pillar / Wall Mounted Jib Cranes. Eddycranes Engineers Pvt. Ltd is an ISO 9001: 2000 company. The Pillar / Wall Mounted Jib Cranes will be fabricated from tested quality steel section with all welded construction. The structure will be designed as per ISS: 807-1976, for cranes. The complete Pillar / Wall Mounted Jib Cranes will be carried on ball/roller thrust bearing in the top and bottom brackets to be fitted on the column. In case column is to be provided by the company, then the column will be fabricated from mild steel pipe. Suitable stiffeners will be provided on the column. A base plate of ample design will also be provided.
The hoisting motor will be three phase squirrel cage conical rotor type working on 400/440volts, 50Hz, A.C. Supply. This motor will be specially designed for hoist and crane duty and will be insulated by class `B/F` type of insulation. The starting and stalling torques of the motors are 220% and 290% respectively of the full load torque. The motor will be rated 40% E.D. The hoist will be equipped with conical type mechanical break, which is 100% fool proof and applies automatically when the power supply is `OFF`. There is a push button that will operate the motor through contactors so as to have controlling voltage at push buttons at 110 volts.
