Paras engineering co, a chennai-based dealer, supplies llathe machine is provided by paras engineering co, a chennai-based dealer. These lathe machines are manufactured by macpower industries, gujarat. This is a light duty machine with bed made from a grade casting 190 to 210 bhn. The length and width of the bed are 4 ½ feet and 240 mm, respectively.The headstock is made of new improved hexagonal design with height of the centre 165 mm. The main spindle made from en 8 alloy steel is supported on precision taper roller bearings. The spindle nose diameter and spindle bore are 62 mm and 40 mm, respectivelysome qualitative featuresof this lathe machine are as follows: . The product has a four-walled closed type apron with oil sump having best quality gears. The sliding and surfacing feeds are engaged by tightening a star knob and lever at appropriate position. The tailstock is a hexagonal shaped body with a tool tray on it and has a tail stock spindle of 38 mm diameter with mt3 internal taper that can be offset for taper turning. The range of metric pitch and inch pitch threads are 1-6 mm and 2-24 tpi, respectively. Following are some of the technical features of this lathe machine which include: a light duty machine with bed made from a grade casting 190 to 210 bhn; length and width of the bed are 4 ½ feet and 240 mm, respectively; headstock is made of new improved hexagonal design with height of the centre 165 mm. The main spindle is manufactured from en 8 alloy steel is supported on precision taper roller bearings. The spindle nose diameter and spindle bore are 62 mm and 40 mm, respectively. Some general features of this lathe machine include: the machine is fitted with a motor of power 1 hp/0.75 kw and the power supply is 415 v, 3 phase 50 hz alternating current; t. The product has b-42 type v-belt for the drive.Change gear set, chuck plate, tool post key, centre adaptor, dead centre [2 nos], and motor pulley are the standard accessories supplied with the machine. The specifications of the machine include: are as follows:* height of centre: 165 mm * bed type: 2v & 2 flat* swing over bed: 330 mm * movement of cross slide: 215 mm * movement of compound slide: 115 mm * weight [approximately]: 460 kg * floor space occupied [approximately]: 1,600 mm x 915 mm x1,370 mm
