Product Profile of Single Channel FFT Analyzer

Single Channel FFT Analyzer is designed for examining machinery vibrations and performing diagnostic routine test on various kinds of equipment. This FFT Analyzer has simultaneous display of acceleration, velocity and displacement. Single Channel FFT Analyzer is offered by Mecord Systems & Services Pvt Ltd

Mecord Systems & Services Pvt Ltd also offers dew point meters, vibration monitors, RF dryer, SCADA system, test chambers, gas-monitoring systems, detectors and sensors. The Single Channel FFT Analyzer has 80 dB dynamic ranges with 16-bit A/D converter. This FFT Analyzer has large LCD panel with EL backlight. This FFT Analyzer operates for more than 22 hours on four IEC R14 [alkaline] batteries. This FFT Analyzer has simple operation using only 10 switches. This FFT Analyzer has internal memory which holds up to 500 data sets.

The Technical Specifications of Single Channel FFT Analyzer are as follows:

• Input Connector: connector for standard accelerometer

• Measurement range: Acceleration: 0.02 to 316m/s2 RMS Velocity: 0.1 to 1000mm/s RMS Displacement: 0.003 to 28.3mm

• Filter: High-pass filter: 3Hz, 10Hz, 1 kHz [-10% frequency] Low-pass filter: 1 kHz, 5 kHz, 20 kHz [-10% frequency]

• Processing items: simultaneous processing of following items [digital] acceleration: rms, peak, crest factor; velocity: rms; displacement: equivalent P-P value [EQ p-p]

• A/D converter: 16-bit, delta sigma principle, 51.2 kHz sampling

• Display range: 80 dB

• Trigger operation: Free-run, repeat, single

• Enables pre and post trigger function