Shenoy Engineering Private Limited manufactures Multi Angle Universal Milling Head. Shenoy Engineering Private Limited offers Automatic Back Spot Facing Tools, Milling & Boring Head, Plano milling Conversion Kit, Taper Jib, Universal Milling Head, Flange Facer Pneumatic Presses, Welding Machines & Tools, etc. Multi Angle Universal Milling Head is multi-utility attachment with spherical contouring and infinite variable orientation capabilities at any desired plane. 2 pairs of spiral bevel gears and 3rotating shafts provide 360 variable orientation facilities. Its spherical contouring capability enables it to tilt 360 around the machine spindle axis, to tilt 360 on its own spindle axis and to oscillate from front to back. In other words, the spindle of the attachment can be positioned at any desired angle - at circular planes or at oscillating plane or at a combination plane of both circular and oscillating positions.
Multi Angle Universal Milling Head consists of 3 modules - flange, central module and vertical module. The flange module and central module have circular T slots, so that the spindle module can tilt on the central module and the central module can tilt on the flange module. While the flange and the central modules are with horizontal axes, the angle between the central and module and vertical spindle module has a unique 45 interface. The drive system consists of 3 shafts [including the spindle] with well-designed, rigid bearing supports and with 2 pairs of bevel gears. The spindle, having ISO-50 taper, is rigidly supported by a pair of angular contact bearings in the front and a matched pair of angular contact bearings in the rear. Gears, shafts, spindles are made of case hardening steel, case hardened and ground. The body, consisting of 3 modules, is made of stress-relieved cast iron and conforms to Grade-25. The spiral bevel gears get located in the shafts/spindles through adequately dimensioned and ground splines. Graduated collars with least count of 1 least count are provided on the spindle and central module. Push button actuated hydraulic clamping and de-clamping of the cutter holding draw bar is offered optionally. Spindle bearings are lubricated for life, using the molybdenum sulfide grease. For the gears, LS 415EP-00 grease is to be used. The ratio between input and output is 1:1.
