Product Profile of Cmp Glydette Centrifugal Dryer

Cmp pvt. Ltd. Offers glydette centrifugal dryer which is the latest, self-contained immersed barrel plating unit for medium scale production. It is mingled into a single piece of apparatus, two plating stations, a water swill, a load/unload station. The glydette is supplied complete with one barrel. Glydette has various parts, they are as follows:

Glydette transporter
The transporter is special equipment which is an advance version of glydo transporter. A power hoist raises and lowers the barrel. Salient features are as follows:

• This is manually transferred.

• Special design of the wheel assemblies coupled with the accurate pre-assembly of the rails has resulted in a smooth,

• Free-running transporter requiring the minimum of effort to set in motion, even with a fully loaded barrel

• Correct location at each station is provided by a simple lever operated cam.

• Loading and unloading

The load/unload station has a chute for loading the barrel. It is locked in the correct position; it is rotated by a handle [as illustrated] and the work discharges through a twin outlet hopper into work trays. These trays are shaped for easy discharge of the work into a centrifugal dryer.

• The plaiting stations

The two plain steel plating stations are fitted with inter-connected anode rods. The brass cathode saddles are unified, thus the incoming d.C. Supply is connected to 2 points only. Barrel drive is by geared motor units at each station operated through pushbutton starters, with overload protection, mounted at the front of the tanks. The swill tank is painted inside with p.V.C. Paint and is complete with weir, drain and overflow outlets.

• Standard barrel units

This is appropriate for various loads and provides full immersion of the cylinder. It is fixed with rocking horns to guarantee positive four point location in the saddles. The standard cylindrical barrel is supplied in perspex, with 3 mm. Damage and danger contracts.

• A high-output extendable system

This system used with zinc plating, with a 20 minute plating time, will handle approximately 5.500 kg. It works with average 40 hour week. This output could be doubled at a later date by the addition of a second barrel unit. The glydette is designed to allow for this addition without further installation work.