Product Profile of Industrial Pre Treatment Plant
Driplex Water Engineering Ltd manufactures Industrial Pre Treatment Plant. Driplex Water Engineering Ltd is an ISO 9000 – 2001 registered organization. The Industrial Pre Treatment Plant are used for removal of mechanical impurities, Colloidal, dissolved impurities, organic matter, detergents, polycyclic aromatics, colouring substances, oils and aliphatic hydrocarbons etc. Which impart taste or odour, polyvalent heavy-metal compounds, germs and bacteria.
Key Features of Industrial Pre Treatment Plant
- Raw water is pumped to an Aerator, which oxidizes soluble iron in the Raw Water from Ferrous to Ferric State.
- Water flows to the Stilling Chamber to break the turbulence.
- Water is then taken into the Flash Mixer for intimate mixing of chemicals with the raw water.
- The raw water is dosed with Alum, Lime and Polyelectrolyte to coagulate and flocculate the suspended / colloidal matter and form flock of higher nuclei thereby enhancing the efficiency of sedimentation.
- Chemically dosed raw water is then fed into the clariflocculator unit wherein flocculation and clarification of raw water takes place.
- The sludge generated in the clariflocculator is bled via Telescopic Bleeds to an underground Sludge Pit. The sludge collected from the plant is finally pumped out.
- Clarified water is collected in the launder of the clarifier located on the top periphery from where it flows to the clarified water reservoir.
- Water collected in clarified water reservoir is then pumped to various consuming points.
