Product Profile of Strain Gauge Based Single-Point Platform Load Cell
Sunshine Sensors manufactures Strain Gauge Based Single-Point Platform Load Cell. Sunshine Sensors is a sister concerns of Sunshine group of industries, which is an ISO 9001:2000 certified company. Sunshine Sensors offers wide ranges of Single point platform load cell, single point table top load cell, single point miniature load cell, s-type beam load cell, single ended shear beam load cell, double ended shear beam load cell, compression load cell etc. Strain Gauge Based Single-Point Platform Load Cell is a strain gauge based low profile bending beam load cell and is ideal for bench, counting, floor, postal and retail scales. This Platform Load Cell is designed for eccentric load sensitivity.
Strain Gauge Based Single-Point Platform Load Cell has the following features:
- Single point Capability with minimum off- Centre error
- Low Profile Bending Beam Load Cell Design
- Support the platform size of 400X400mm
- Moisture Proof sealing harsh Environment
This Low Profile Single-Point Platform Load Cell is ideal for:
- Bench, Counting & Postal Scales
Product Specification of Strain Gauge Based Single-Point Platform Load Cell
- Creep:<± 0.03%Fso (30 Minutes)
- Deflection:<0.5 mm at FSO
- Eccentric Load Effect:<0.02% of FSO at 1/3 rated load placed at the edge of the Specified size platter
- Excitation Voltage:10 VDC - Maximum 15 VDC
- Hysteresis:<± 0.02%FSO
- Input Resistance:420 ± 15
- Insulation Resistance:>1000 Mega Ohms at 50 VDC
- Nominal Output:2.0 mV/ V
- Non-Repeatability:<± 0.01%FSO
- Output Resistance:350 ± 3
- Platter Size:400 x 400
- Safety Overload:150% of Rated Capacity
- Standard Capacity:60, 75 & 100
- Temperature:0 - 60 °c
- Temperature Effect:On Output: <0.0015%FSO/ °C
On Zero: <0.0020%FSO/ °C
- Tightening Torque:2 m.Kg.
- Ultimate Overload:250% of Rated Capacity
- Zero Balance:± 5.0%FSO
