Product Profile of Strain Gauge Based Single Point Miniature Load Cell
Sunshine Sensors supplies Strain Gauge Based Single Point Miniature Load Cell. Sunshine Sensors is a sister concern of Sunshine Group of Industries, which is an ISO 9001:2000 recognized company. Sunshine Sensors offers wide ranges of single point platform load cell, single point table top load cell, single point miniature load cell, s-type beam load cell, single ended shear beam load cell, double ended shear beam load cell, compression load cell etc. Strain Gauge Based Single Point Miniature Load Cell is ideal for low eccentric load sensitivity and provided with mechanical over load & under load protection mechanism.
Key Features of Strain Gauge Based Single Point Miniature Load Cell
- Single Point Capability with minimum Off-centre error
- Low profile Design
- Capacity as low 300 gmf Full Scale
- Moisture Proof Sealing
- Inbuilt Protecting Bracket
- Precision Jewelry Scales
- Small Bagging Machine
- Thread Tension Measurements
Product Specification of Strain Gauge Based Single Point Miniature Load Cell
- Creep:<± 0.03%Fso (30 Minutes)
- Deflection:<0.5 mm at FSO
- Eccentric Load Effect:<0.02% of FSO at 1/3 rated load placed theedge of the specified size platter
- Excitation Voltage:10 VDC - Maximum 15 VDC
- Hysteresis:<± 0.02%FSO
- Input Resistance:420 ± 15
- Insulation Resistance:>1000 Mega Ohms at 50 VDC
- Nominal Output:1.6 mV/ V
- Non-Repeatability:<± 0.01%FSO
- Output Resistance:350 ± 3
- Platter Size:120 Dia.
- Safety Overload:150% of Rated Capacity
- Standard Capacity:300, 400, 500, 750 Kgf.
1, 1.5, 2 Tf.
- Temperature:0 - 60°c
- Temperature Effect:On Output: <0.0015%FSO/ °C
On Zero: <0.0020%FSO/ °C
- Ultimate Overload:250% of Rated Capacity
- Zero Balance:± 5.0%FSO
