Key Features of Portable Vacuum Blasting Equipment

• Portable: Mounted on castors and can be carried onsite / near to the job as required.
• Large sized components can be blasted in site
• Do not require blast room
• Work on the direct pressure principle of abrasive blasting. T
• Heavy scales are contaminations and easily removed.
• Maintains consistency in cleaning and finishing.
• Abrasive is cleaned from dust and debris inline in the reclaimer before being fed to the blast gun for recycling.
• Metallic abrasive like grit and steel grit / shots are recycled and reused continuously.
• The media recycling is thus automatic.
• Machine on / off control is located at the blast gun for the ease of operator.
• No risk of flying abrasive and dust.
• Dust and debris are collected in the dust collector.
• Exhaust air to the atmosphere is clean and environment friendly.
• Overall Dimensions [mm]: 800 X 1100 X 2200 H and 800 X 2000 X 2200 H
• Abrasive Tank Capacity: 42 Litres [1.5 cft] and 2 Litres [1.5 cft]
• Storage Tank Capacity: 28 Litres [1.0 cft]
• T.C. Lined Blast Nozzle: 6 mm
• Blast Hose Dia & Length: 19mm X 7.5 metres.
• Suction Hose Dia. & Length: 38 mm X 8 metres.
• Dust Collector Hose: 75 mm X 1.5 metres.
• Recovery System: Air Injector or Vacuum Pump
• Dust Collector: S.S. Cartridge or Paper Cartridge
• Compressed Air Requirement: 290 cfm at 6.33 kg / Sq.Cm. or 68 cfm at 6.33 kg / Sq.Cm.
• Electrical Load Required: Nil or 10.0 HP, 415V, 3P, 50 Hz
• Cleaning Rate Inlet Air Connection: 19 mm