Product Profile of Single Phase Smps With Power Supply 24V 5A
Single Phase SMPS with Power Supply 24V 5A has latest state-of-the-art current mode PWM controller and MOFSET based design. Sanstar Microsystems Private Limited offers Single Phase SMPS with Power Supply 24V 5A. Sanstar Microsystems Private Limited also manufactures various products based on switching technology like switching mode power supply, battery chargers and isolated dc to dc converters. The Single Phase Switching Mode Power Supply -SMPS with Power Supply 24V 5A, Model SSM2405 [110VAC], has built-in EMI filter and low ripple and noise. This SMPS has soft start circuit to limit the ac inrush current and screw type input and output connectors. This SMPS has momentary output short circuit protection and over voltage protection. This SMPS is compact and has a light weight.
The Technical Specifications of Single Phase SMPS with Power Supply 24V 5A are as follows:
- Input Voltage: 90V - 135V AC.
- Input Frequency: 45 - 60 Hz
- Input Connector: 3-pin screw type connector.
- Dimension: 165mm X 105 mm X 60 mm
Product Specification of Single Phase Smps With Power Supply 24V 5A
- Cooling:By free air convection.
- Dimensions:165 x 105 x 60 (L x W x H)
- Efficiency:70
- Hold Time:> 20 mSec on full load.
- Input Connectors:3-pin screw type connector.
- Input Frequency:45 – 60
- Input Protection:a) 4 Amp, 20 mm fast blow, Glass fuse.
b) MOV, for input over voltage protection.
- Input Voltage:90 V – 135 V AC.
- Line Regulation:< ± 0.5
- Load Regulation:< ± 0.5
- Model No.:SSM2405 (110 VAC)
- Mounting:Panel Mounting.
- Operating Temperature:55 at Full Load and 70 at 60% load.
- Output Connectors:2-pin screw type connector.
- Output Current:05
- Output Power:Max. 125
- Output Protection:Over Voltage Protection.
- Output Voltage:24
- Relative Humidity:95% NC.
- Ripple and Noise:< ± 1% P - P.
- Temperature Rise:Max. 50
