Sando industries offers cone screw dryers. A cone screw dryer consists of a jacketed conical vessel with an orbiting arm and rotating screw which provides three-dimensional motion. A heat transfer jacket is used to transfer heat into the product through a jacketed vessel wall to evaporate moisture or solvents. A stirrer screw revolves along the vessel wall and circulates the product continuously from bottom to top of the cone where mass is transferred as a liquid or vapour within the solid which helps the vapour to be free from particles and improve the heat transfer conditions. In vacuum operation, the vessel under constant vacuum removes the vapour from the feed material and the light fine powder is separated from vapour into a bag-filter which in turn reduces the boiling temperature of the solvent and does the drying at considerably low temperature with increasing drying efficiency.. For the recovery of moisture or solvents, a condenser along with a receiver can be provided. Drying time is totally dependent on the material characteristics, heat conduction of solids and solvents, pressure and temperature.
Features include: low energy consumption; no degradation/no oxidation; no segregation; no seals or bearing in direct contact with products; gentle to the product; dust-free operation; complete and fast removal of moisture; fast drying; total solvent recovery; dried solids can be used straightaway after discharge; easy to install, operate, and clean; suitable for sterile operation; and the operators are not exposed to toxic or hazardous materials.
Industries use: pharmaceutical, cosmetics, chemical and food industries
Functions: cone screw dryers are ideal for final drying of powders, granules, pastes and slurries
By drying, heating, mixing, reaction, granulation, homogenizing, and dispersion, under pressure, vacuum or atmospheric conditions.
