Chemac equipments offers powder process equipment. The entire unit is fabricated with engineering precision. Along with the double ribbons, which provide to and fro, up and down movement to the powder. Two chopper blades moving at cutting speed are provided at diagonally opposite sides to break lumps/coarse particles of the mixture. Liquid spraying nozzles attached with suitable pneumatic dosing system is kept optional. This ensures small amounts of any liquid such as perfumes or fortifying agents to be sprayed and mixed thoroughly with the powder. Proper venting around is provided to prevent powder mist spreading around the working area of the mixer. N2 blanketing can be provided. Proper hoppers with mechanical sieves at the feeding station can be provided on request. All the glands and seals are properly designed and machined so that the powder does not leak out through the shaft seals. A pneumatically operated bottom valve attached below facilitates removal of the blended powder in drums. The unit can be provided with load cells to weigh the mass accurately.
