Product Profile of Infinite Control Switch With Operating Temperature 0 To 85degree C
Peena Traders supplies Infinite Control Switch with Operating Temperature 0 to 85Degree C. Peena Traders offers Electronics & Temperature Control Equipments following ISO-9000 Standards. The Infinite Control Switch with Operating Temperature 0 to 85Degree C gives infinite control for non-inductive loads up to 15 Amps on 120 or 240 V-AC [cannot be used with an external contactor]. It can be turned either to left or right to adjust proper heat from 0-100% wattage with infinite control over the first 50% of total wattage. Energized continuously in HI position, at other settings this Infinite Control Switch delivers selected input level under control of a simple bimetal timer. Only 3 mounting holes is necessary to install the Infinite Control Switch in customer supplied box or panel.
Key Features of Infinite Control Switch With Operating Temperature 0 To 85degree C
- Simplicity of design with no cams or levers to adjust and no motor to burn out
- Automatic compensation for line voltage fluctuations up to ± 15%
- Bimetal acts at settings less than HI to limit electrical input and depress temperature
- Mechanical Bi-Metal Operation
- Knob Setting 0 - 100% Output
- Double Pole, Single Throw
- DPST] Snap-Action
- Positive Break
- 120 or 240 V [AC] depending on model 1,800 & 3,600 Watts
- Cannot be used with a contactor
- Line Input: 230V OR 120V + 20%, 15Amp max
- Range: 5% at low- 100% at high, adjustable
- Isolation: 2.5kv A.C, for 1 minute, leakage current < 3.5mA
- Lerakage Current: < 210 mA
- Life: 1, 00,000 Switching cycles under normal conditions
- Safety: Meets VDE, IEC Standards
- EMC CE Marked
- Dimensions: length-40mm width-40mm height-74mm approx.
- Weight: 110gm approx. without dial plate
