Product Profile of Infinite Control Switch
Peena Traders offers Infinite Control Switch. Peena Traders offers Electronics & Temperature Control Equipments following ISO-9000 Standards. The Infinite Control Switch, Type BHA-259 gives infinite control for non-inductive loads up to 15 Amps on 120 or 240 V-AC [cannot be used with an external contactor]. It can be turned either to left or right to adjust proper heat from 0-100% wattage with infinite control over the first 50% of total wattage. This Infinite Control Switch is energized continuously in HI position. At other settings, it delivers selected input level under control of a simple bimetal timer. Only 3 mounting holes is necessary to install the Infinite Control Switch in customer supplied box or panel. It is designed for use at ambient temperatures up to 85degree C
Key Features of Infinite Control Switch
- Simplicity of design with no cams or levers to adjust, and no motor to burn out
- Automatic compensation for line voltage fluctuations up to ± 15%
- Bimetal acts at settings less than HI to limit electrical input and depress temperature
- Mechanical Bi-Metal Operation
- Knob Setting 0 - 100% Output
- Double Pole, Single Throw
- Positive Break
- Line Input: 230V OR 120V + 20%, 15Amp max
- Range: 5% at low-100% at high, adjustable
- Isolation: 2.5kv A.C, for 1 minute, leakage current < 3.5mA 2.5kv A.C, for 1 minute, leakage current < 3.5mA
- Operating Temperature: 0 to 85degree C
- Safety: Meets VDE, IEC Standards
- EMC: CE Marked
- Dimensions: length-50mm, width-41mm, height-74mm approx
- Weight: 110gm approx without dial plate
