Product Profile of Air Cooled Isolation Transformer
NIFA Electronics Pvt. Ltd supplies Air Cooled Isolation Transformer. NIFA Electronics Pvt. Ltd offers a wide range of products based on power conditioning and power management like inverters, stabilizers, voltage regulators, transformers, capacitors and control relays. The Air Cooled Isolation Transformer isolates one circuit from another circuit with common magnet circuit and exhibits proper working in electrical wiring circuits, low gain circuits or insensitive instruments.
Key Features of Air Cooled Isolation Transformer
- Extremely low inter winding coupling capacitance.
- Filters power line noise, spikes and transients
- Minimizes Common mode noise by over 110 dB
- High DC Galvanic Isolation
- Reduces transverse mode noise
- Latest Technology for Multiple Electrostatic Shielding
- Input Voltage: 115/230VAC + 10% two windings in parallel or series.
- Acceptable Line Frequency: 47 to 53 Hz.
- Mode of Operation: As step-down or step-up or 1:1 Isolation Transformer.
- Common Mode Noise Attenuation: More then 100 dB.
- Coupling Capacitance: Less than 0.005pF.
- Dielectric Strength: 2500V AC for 2 minutes.
- Load Regulation: Within 3.5%
- Computer
- Sensitive instruments
- Hospitals
- Micro processor based equipment
Product Specification of Air Cooled Isolation Transformer
- Common Mode Noise Attenuation:More then 100 dB
- Cooling:Natural Air Cooling
- Coupling Capacitance:Less than 0.005pF
- DC Galvanic Isolation:Over 1000m.ohms between any windings or windings to ground
- Dielectric Strength:2500V AC for 2 minutes
- Input Voltage:115/230VAC + 10% two windings in parallel or series
- Line Frequency:47 to 53 Hz
- Load Regulation:Within 3.5%
