Product Profile of Digital Air Leakage Tester
Rolastar Pvt. Ltd. Offers Digital Air Leakage Tester. Rolastar Pvt. Ltd. Is certified to SMACNA DW/143 standards for ultra -low air leakage and high structural rigidity. The Company is also nominated by BRY - AIR 2006 Awards for best Product design. The Company also manufactures factory-fabricated ducting. The Digital Air Leakage Tester is used to measure duct leakage as per percentage or in ltrs/sec/sq. Mtr of duct surface area. The Digital Air Leakage Tester has digital control panel and fan impeller casing. The Digital Air Leakage Tester has fixed and changeable nozzle. This Tester has duct adapter plate and flexible hose and motor housing.
Key Features of Digital Air Leakage Tester
- Has fixed nozzle -H which is directly connected to conical blower inlet [not removable] and is used for large flow measurements.
- Has changeable nozzles `F` [small] and `G` [medium] which can be slide in to the large inlet nozzle `H` for use at reduced flow levels.
- Has digital control panel- kept on top of the motor guard.
- Has printer
- Has duct adapter plate and flexible hose
- Has motor housing
- Has tapered inlet / fan transition duct.
- Has five metre long PVC tubing to connect the duct pressure tapping point on the duct plate
- Has adapter fitted to the ductwork under test.
- Has another short PVC tubing to connect the inlet nozzle pressure connection to the electronic
- Has differential pressure transmitter [0-1000Pa].
Product Specification of Digital Air Leakage Tester
- Key Features:1. ixed nozzle –H:- this is directly connected to conical blower inlet (not removable) and is used for large flow measurements.
2. Changeable nozzles ‘F’ (small) and ‘G’ (medium) shown can be slide in to the large inlet nozzle ‘H’ for use at reduced flow levels.
3. Digital control panel- kept on top of the motor guard.
Printer
- Other Features:1. Fan impeller casing.
2. Tapered inlet / fan transition duct.
- Pressure measuring instruments:Electronic differential pressure transmitters
0-1000 Pa – For measuring suction pressure
0-2500 Pa – For measuring duct static pressure
- Printer:Serial port Thermal printer
- Fan Speed:100 Litres per sec / 212 CFM, 10” W.G. / 2500 Pa
- Weight:25 K
- Power Supply:230VAC, 1 Ph, 50 Hz
- Applicable Standard:SMACNA DW 143
- Electric Motor:2/3 H.P., 7000 rpm maximum speed brush motor
- Flow Control:Electronic Speed Control
