Polyglass offers a low permeation rate, combined with excellent resistance to abrasion and cathodic disbondment. The inherent durability and under cutting resistance of this high performance coating enables it to remain intact, even when damaged through to the metal substrate, with negligible under film creep. Polyglass requires no primer although a primer can be provided where logistics demand. It cures quickly and can be applied in single coat. Polyglass can be used on a wide variety of substrates including steel and concrete, and has been used for protection in the offshore, oil and petrochemical, power generation, marine, water/sewerage and process industries. Polyglass materials can be used with standard airless spray set-ups, plural component systems and for small areas with conventional gun and pressure pot. Polyglass materials cure at low temperatures as high as 40°c. Polyglass is produced with a specially manufactured micro flake using ecr [extra corrosion resistant] glass. Ecr glass flake imparts better qualities to polyglass than standard glass flakes and in conjunction with highly modified resin systems provides a very low permeation, mechanically strong, tough and abrasion resistant coating with outstanding long term performance.
