Product Profile of Microprocessor Controlled Co2 Insufflator With Built-In Gas Warmer
Life Care Equipments Pvt. Ltd offers Microprocessor Controlled CO2 Insufflator with Built-in Gas Warmer. Life Care Equipments Pvt. Ltd supplies a wide range of Analytical and Medical Instruments like Ultrasonic Cleaners, pH meter, Conductivity Meter, Peristaltic Pumps and Dry Baths. The Microprocessor Controlled CO2 Insufflator with Built-in Gas Warmer of model number ENCO2-30H provides Stable pressure balance in the abdomen by high gas flow performance and low insufflation pressure.
Key Features of Microprocessor Controlled Co2 Insufflator With Built-In Gas Warmer
- Advance Flow Control
- Software controlled pressure release mechanism prevents dangerous pressure build up in the abdomen
- Automatic self check, activated each time the unit is switched on
- System Gas Heater comes with build in high efficiency gas heater.
- Four line LCD display can provide information on Operating Parameters, Operating Instructions and Fault Indications
- Insufflation pressure: 0 - 30 mm Hg
- Display: 4 Line LCD
- Dimension [ W X H X D ]: 290 mm X 105 mm X 260 mm
- Weight: 2 kg
- Gas: CO2 [Medical]
- Gas Connection: UNF 7/16"
- Power Consumption: 15 Watts Maximum
- Input Pressure Minimum: 1 Bar
- Input Pressure Maximum: 10 Bar
- Output Connection: 4 to 5 mm ID tube
- Flow Rate Setting: 1 to 30 Litres/ min.
- Keyboard: Feather Touch
- Input Supply Voltage: 230 VAC &plusmin; 15% at 50 / 60 Hz [110 V optional]
Product Specification of Microprocessor Controlled Co2 Insufflator With Built-In Gas Warmer
- Dimensions:290 mm x 105 mm x 260 mm
- Display:4 Line LCD
- Flow Rate Setting:1 to 30 Ltr/min.
- Gas:CO&sub2; (Medical)
- Gas Connection:UNF 7/16"
- Gas Warmer:Builtin
- Input Pressure:Minimum: 1 Bar
Maximum: 10 Bar
- Insufflation pressure:0 - 30 mm Hg
- Keyboard:Feather Touch
- Output Connection:4 to 5 mm ID tube
- Power Consumption:15 Watts Maximum
- Supply Voltage:230 VAC ± 15% @ 50 / 60 Hz (110 V optional)
- Weight:2 kg
- Applicable Standard:IEC 601-1 / EN 60601-1
