Product Profile of Wire Mesh Welder
Mechelonic Engineers Pvt. Ltd manufactures Wiremesh Machine. Mechelonic Engineers Pvt. Ltd offers welding machines, engineering custom solutions, etc. Wiremesh Machine is designed for economical manufacture of welded steel wire fabric for general use, conforming to I.S. 1566/4948 as per the welding range specified. The wires for the mesh can be cold drawn or can be galvanized steel wires. However, they should be clean and without any rust and oil. The construction permits the longitudinal wires to be fed directly from spools, automatically pulled as the fabric progresses whereas cross wires cut to length, straightened and fed into longitudinal wires during welding. It is advisable that customer provide a five roller straightener cum stand for proper feeding of long wires.
Specifications of Wiremesh Machine:
- Construction: The main frame of the machine is of welded steel construction, suitably strengthened at various places. It is stress relieved after welding so as to maintain its alignment.
- Transformer: The main frame supports a battery of transformers connected suitably over three phases of power supply for balanced loading and maximum utilization of power
- Drive System: It incorporates motor, brake, worm gear reducer and eccentric drive
- Line Wire Feeding: This consists of a slide on which number of unidirectional clutches/collets is fixed
- Cross Wire Feeder: Cross wire cut to length and straightened are put in hopper and automatically fed between the electrodes by a feeding bar which is operated by a pneumatic actuator
- Control System: The machine is provided with synchronous solid state electronic control circuit consisting of squeeze timer, weld timer, heat control card and thyristor firing systems
- Cooling System: All bus bars, transformers and thyristors are water cooled by continuously running water through passages provided
