Product Profile of Flow Control Valves With Adjusting Knob
Flow Control Valves with Adjusting Knob find application in pneumatic circuits where finite flow control of air is required. These Flow Control Valves are available for port sizes ranging from ⅛" to 1" BSP and are installed directly on the ports of the cylinder in such a manner that the discharge from the cylinder is restricted whereas the inlet fluid coming from the valve to the cylinder has free flow. These Flow Control Valves are fitted with an adjusting knob and the flow in opposite direction is regulated by a metering screw. Flow Control Valves with Adjusting Knob achieve speed regulation of both strokes in a double acting cylinder, by using two separate flow control valves on each port of the cylinder.
KJN Enterprises is the manufacturer of Flow Control Valves with Adjusting Knob. KJN Enterprises is the supplier of pneumatic presses, Conventional, Toggle and Impact Presses that are used in all types of industrial setting.
Key Features of Flow Control Valves With Adjusting Knob
- Used in pneumatic circuits where finite flow control of air is required
- Available for port sizes ranging from ⅛" to 1" BSP
- Finds application in the regulation of piston speeds of a power cylinder
- Installed directly on the ports of the cylinder in such a manner that the discharge from the cylinder is restricted whereas the inlet fluid coming from the valve to the cylinder has free flow
- Installed on the port opposite to which pressurized air is being fed to move the piston.
- Speed regulation of both strokes in a double acting cylinder is achieved by use of two separate flow control valves on each port of the cylinder
- Consists of a body and an adjusting knob fitted into the body
- Has a built-in non-return valve that allows full flow of air in one direction
- The flow in opposite direction is regulated by a metering screw
- The adjusting knob of the valves is designed such that it can be adjusted by fingers or by the means of an adjustable wrench
