Product Profile of 8051 Microcontroller: Easy-8051b
Dynalog [India] Limited supplies PIC Microcontrollers: Easy-8051B. Dynalog [India] Limited is an ISO 9001: 2000 certified company. The PIC Microcontrollers: Easy-8051B includes a development board for PIC microcontroller with on board In-Circuit Debugger and USB programmer system, which is compatible with 14, 16, 20 and 40 pin microcontrollers [it comes with AT89S8252]. The USB 2.0 Programmer is supplied from the system and the programming can be done without taking the microcontroller out. Many industrial applications can be tested on the system like, temperature controllers, counters, timers, etc. Every pin is marked in order to make the work easier. Each port can be set to PULL-UP or PULLDOWN resistors depending on the current needs. Also, there are PLCC44 and PLCC32 sockets for 32 and 44 pin MCU`s.
Key Features of 8051 Microcontroller: Easy-8051b
- RS-232 communication with PC or another microcontroller
- Support for Microcontrollers in DIP-14/16/20/28/40 and PLCC- 32/44 socket. 4 seven-segment digits in multiplex mode
- Pull up or Pull down port defining.
- In-Circuit Debugger on-board.
- Connectors for GLCD and LCD in 4/8 bit mode [LCDs not included].
- System can be easily configured via clearly marked dip switches.
- Potentiometer is available for testing AD conversion and comparators.
- All pins are connected to ICD connectors for further connecting.
- 38 buttons for program developing needs
- External power supply can be DC or AC.
- All pins are marked on the back of the board.
- Reset circuit.
- Digital thermometer DS1820 for measuring temperature from -55degree C to 125degree C [DS1820 not included].
- Power Supply select - USB or external.
- 38 diodes for displaying states of all pins on the microcontroller at the same time.
- On-board peripherals can be easily configured via clearly marked DIP switches.
- Selectable contrast: GLCD or for LCD.
- Crystal can be removed and replace with another one.
- Choose voltage level to be applied when a button is pressed [GND or +5V].
- DAC Converter available for testing DA conversion.
- Vref+ - For ADC and DAC 4.096V is available.
