Product Profile of Humidity Chambers Plus
Humidity Chambers Plus are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement. The Chambers control precise temperature and humidity. The Chambers comes with fan motor for forced air circulation to maintain uniform conditions inside chamber. The Humidity Chambers Plus ensure heating by long life stainless steel tubular heaters.
Remi Electrotechnik Ltd is the manufacturer of Humidity Chambers Plus. Remi Electrotechnik Ltd is the supplier of laboratory and blood banking instruments like bench top centrifuges, compact cooling centrifuges, environmental test chambers, stability chambers, constant temperature water baths, rotary shakers, orbital shaking incubators, high-speed centrifuges, microprocessor based centrifuges, direct drive stirrers, environmental test chambers, laboratory refrigerators, orbital shaking incubators, therapeutic chairs and tube sealer. Remi Electrotechnik Ltd is an ISO 9001-2008 and ISO-13485:2003 registered company.
Key Features of Humidity Chambers Plus
- Control precise temperature and humidity
- Comes with fan motor for forced air circulation to maintain uniform conditions inside chamber
- Ensures heating by long life stainless steel tubular heaters.
- Low water level alarm and power cut off of boiler tank heater.
- High temperature safety cut off and alarms for high/ low set parameters
- Output for remote alarm
- Electrical circuit breaker
- Time delay for compressor switch on
- Overload cut off relay for compressor
- Settable high/ low alarm points with date and time
- Memory for storage of up to 1000 record
Product Specification of Humidity Chambers Plus
- Alarm:Power Failure Alarm : Visual Alarm ; Door Open Alarm : Audio Visual Alarm in case door open for over one minute.
- Body Materials:Internal Body Material : Stainless Steel - 304 grade (Standard Models), Stainless Steel - 316 grade (GMP Models) ; External Body Material : Powder Coated CRCA Steel (Standard Models), Stainless Steel - 304 grade (GMP Models).
- Display:4 " LCD Screen, Large size Display for ease of reading
- Electricals:220-240 volts, 50 Hz, Single Phase
- External Dimensions:800mm x 1095mm x 1020mm (W X D X H)
- Humidity Range:Humidity Range (Rh) & Accuracy : 40% to 95 %, ± 3%
- Illumination:8 Watts Fluorescent Tube
- Insulation:70 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam.
- Internal Dimensions:660mm x 655mm x 450mm (W X D X H)
- Model:CHM-6 Plus SG-6 Plus
- Internal Volume:200 Liters
- Stabilizer Req:Recommended Voltage Stabilizer : VS-04
- Temperature Range:Temperature Range & Accuracy : 10 °C to 60 °C, ± 1 & deg;C
- No. Of Shelves:2/3
- Noise Level:Less Than 65 db (A)
- Temperature Alarm:Temperature/ Humidity Variation Alarm : Set humidity ± 3%, Set Temperature ± 1°C, Audio Visual Alarm.
- Temperature Controls:Temperature & humidity Control : Microprocessor with Capacitance type sensor
