www.jimtrade.com
Menu

Mooney Viscometer With Pre-Heat Time 0 To 10 Minutes

Mooney Viscometer With Pre-Heat Time 0 To 10 Minutes

Product Category :    Testing and Measuring Instruments

Supplier                :    Future Foundation

Key Features of Mooney Viscometer with Pre-heat Time 0 to 10 minutes

  • Data capture & display: Torque signal generated by the Torque Sensor is appropriately modulated, amplified and then the analogue signal is converted into equivalent digital signal through an efficient Data Acquisition Card.
  • Display of Results: At the end of the test, the Computer calculates the results automatically and displays it. These results can also be printed as "Run Time Report".
  • Data Characteristics: Specimen Serial No, Date of testing, Type of test, Preheat time, Temperature of test, Size of Rotor, Condition of specimen, milled/unmilled, Based on above seven variables , Visisoft commands to open a Master file [ STOCK & CONTROL LIMIT ]. The computer later on compares and analyses the test data graphically and statistically, based upon these variables.


Inquire Now
Product Profile of Mooney Viscometer with Pre-heat Time 0 to 10 minutes

Future Foundation manufactures Mooney Viscometer with Pre-heat Time 0 to 10 minutes. Future Foundation supplies various types of testing and measuring instruments. The Mooney Viscometer with Pre-heat Time 0 to 10 minutes is designed for accurate measurement of viscosity, scorch time and cure rates of the elastomers. This viscometer consists of flat, cylindrical disk, driven by a motor to rotate slowly and continuously in one direction.

Key Features of Mooney Viscometer with Pre-heat Time 0 to 10 minutes
  • Data capture & display: Torque signal generated by the Torque Sensor is appropriately modulated, amplified and then the analogue signal is converted into equivalent digital signal through an efficient Data Acquisition Card.
  • Display of Results: At the end of the test, the Computer calculates the results automatically and displays it. These results can also be printed as "Run Time Report".
  • Data Characteristics: Specimen Serial No, Date of testing, Type of test, Preheat time, Temperature of test, Size of Rotor, Condition of specimen, milled/unmilled, Based on above seven variables , Visisoft commands to open a Master file [ STOCK & CONTROL LIMIT ]. The computer later on compares and analyses the test data graphically and statistically, based upon these variables.
  • "Powerful Analytical Software" analyses it can present summarized or detailed reports.
  • The system has a unique facility of updating and re- arranging the data, which can get corrupted whenever the power supply is interrupted.
  • The system has the facility to take the back-up of the data on floppy, which can be restored in case of corruption of data or hardware failure.
  • Mooney measuring range: 0 to 200 MU [4 digits]
  • Mooney measurements: Choice of 3 readings
  • Scorch points: Choice of 4 readings
  • Rotor size: Large and small
  • Rotor Speed: 2.0+-0.02 RPM
  • Drive Motor: Synchronous geared motor
  • Temperature: PT100 Platinum resistors
  • Microprocessor controlled
  • Calibrated range 50 to 200 C.
  • Independent Upper and Lower Platen Control.
  • Temperature Control: Accuracy +- 0.5 C
  • Processing behaviour
  • Research and development
  • Quality control tool
  • Choosing correct polymer grade.
  • Grading of polymer.
Recently Updated Products



Digital Dynamometer with Hand Held Remote Reader
Digital Dynamometer with Hand Held Remote Reader
Supplier    :    Birdman Chemeng Private Limited
Inquire Now
Testing And Measuring Equipment
Testing And Measuring Equipment
Supplier    :    Embit Technologies
Inquire Now
Measuring Tools And Equipment
Measuring Tools And Equipment
Supplier    :    Filtration Engineering & Consultants
Inquire Now
Oil Tan Delta Tester
Oil Tan Delta Tester
Supplier    :    Ajit Electronics Corporation
Inquire Now
Industrial Grade Lubricity Tester
Industrial Grade Lubricity Tester
Supplier    :    Tribotech Technologies Pvt. Limited
Inquire Now