Key Features of Automatic Ozone Environment Test Chamber

• Future Foundation Ozone Test Chamber Features
• Ozone ranges: 25, 50, 100, 200 [PPHM] as per ISO 1431-1/23
• Temperature Ranges: +5 Deg C to +90 Deg C
• UV - Absorption Analyzer
• No Additional Venting / Filtering
• Low level Maintenance Costs
• Design as per ISO: 1431
• Static & Dynamic Test rigs
• Dynamic Test piece carriers
• 8-sample frames
• Adjustable strain: 5%, 10%, 15%, 20%, 25%, 40%, 60%,
• Static Test piece carriers
• 5-sample frames
• Variable, adjustable strain on each frame.
• Rotating carrier 1 Revolution / 5 minutes
• Future Foundation Ozone Test Chamber Control Unit
• Complete control & monitoring of Ozone Test Sequence
• Computer Interface via RS-485
• Customized control, reporting & monitoring by FF Ozone Soft
• Ozone Measurement by UV-Absorption Analyzer
• System safety via interlocked circuitry
• Mounting on chemical resistant full swivel casters for maintenance & cleaning
• Chemical free operation.
• Exposure Chamber
• Dimensions 500 X 500 X 600 [150L]
• Ozonised Air Flow 50 - 500 L / min
• Maximum of 3 air changes / min
• Effective Velocity of 3.3 to 33.3 mm / sec.
• Internal circulation fan to ASTM D-1149.60mm/sec. [2 feet/sec.]
• Test Chamber Illumination.
• Closed loop air/ozone system
• Test Sample Piece Carrier:
• Static test piece carrier
• 5 sample frames of variable, adjustable strain an each frame
• Rotating Carrier 1 Rev/5mins.
• Dynamic test piece carrier
• 8 sample frames
• Adjustable strain 5%, 10% 15%, 20%, 25%, 40% & 60%
• Operating frequency 0.5Hz.
• Temperature Range
• Operating range: +5 Deg C to + 90 Deg C.
• Control accuracy : + 1 Deg C
• Ozone Concentration
• Operation range measured in PPHM 25-200.
• Ozone generation through UV-Lamps from dried air.
• Ozone recovery after sample insertion within 30 minutes.
• Ozone Measurement
• UV absorption Analyzer
• Measurement accuracy + 2 PPHM.
• Computerized Control, Recording & Reporting
• Customized FF Ozone-Soft"
• Complete software control of Ozone Test sequence.
• Customized reporting of test results as per ISO: 1431-1/2.
• Dimensions
• Main Chamber: width 800 X Height 1500 X Depth. 800mm
• Control Unit: 500 X 1000 X 650