Triveni Engineering & Industries Ltd supplies Belt Filter Press. Triveni Engineering & Industries Ltd is ISO 9000-2000 and ISO 14001 certified. Belt Filter Press [BFP] offers sludge dewatering unit which can be applied through organic and inorganic sludges to achieve required results at less operating cost. The BFP can handle very lean sludges and for this an independent gravity drainage deck is provided to pre-thicken the sludge before it enters the main BFP sections. Basically in the Belt Filter Press, the sludge dewatering is achieved by bringing the sludge between the two moving belts which in turn moves on the varying sizes of rollers keeping belts under tension through hydraulic cylinder system, which results in squeezing out the liquid trapped between the solids and withdrawn separately through the filtrate trays. Adequate arrangement is provided for auto belt tracking, which makes the system operator friendly. The Belt Presses can be supplied in carbon steel or stainless steel construction depending upon the job requirement. These units can be supplied in different sizes up to 3m width.
