Jasmer machine tools manufactures hydraulic milling machines. The base of heavy rigid casting serve also as coolant tank also provides suitable platform for robust operation. The hydraulic milling machines comprise of rigid column; hand scraped and lapped/ground traces; heavy knee as a box and rests on vertical column equipped with thrust bearing and protected from dirt and chips by telescopic covers. The moveable parts inside are protected from foreign matter and coolant, the knee being closed at the upper end. All the hand wheels are relatable and have automatic feeds in three directions limited by adjustable feed trip dogs. The worktable has a sturdy construction and three t-slots and is provided with coolant channels and the dovetail comes with an adjustable jib. In the construction of the universal milling machine special importance is attached to sturdy construction of the base of the table. The hydraulic milling machines are available with technical specifications like working pressure of the table lead screw is taken up through pressure thrust bearing; power drive is through an electric motor flange mounted at the rear of the machine; clutch leavers are placed within reach on both sides of the column; and driving shaft and spindle shaft are bedded in roller and ball bearings respectively. The company supplies these hydraulic milling machines with electric motors, electric coolant pump with fitting, electric panel and one inch diameter arbour as standard equipments and swivel base, machine vice, 300 mm and 400 mm rotary table with iso 40 adaptor indexing plate, collects, jigs and fixtures as additional equipment.
