Key Features of Production Machine For Auto Prop Shafts

• Low set up time [both electronic and mechanical] are possible.
• In cases of the electronic system, only a new rotor code has to be keyed in.
• Alternatively 6 dials have to be set to precept levels. In case of mechanical set up, it is easy to change spigot locator.
• When changing from front end to rear end shafts, the spindle has to be swung out and rollers brought in; by rotation or by sliding [time is about 2 minutes only].
• The offered machine is a high production balancing machine. It is suitable for 3 piece shafts when ordered with THIRD PEDESTAL [can be quoted at an extra cost on request].
• The machine is suited for high balancing speeds going upto 7000 rpm.
• The offered machine is of rugged construction and is capable of sensing unbalance as high as 1 mm of centre of gravity on the average size of your propeller shaft.
• Sensitivity is much better than the requirement being 0.5 gm.cm. [5 g.mm].
• Fast acceleration, stopping and measurement ensures low cycle times.
• High production tooling for propeller shafts, interchangeable clamping dogs and spigot insulators ensures ensure easy changeover.
• The distance of the propeller shafts from the front and of the main machine bed is only 180 mm for simple loading [For isotropic soft bearing machines].
• The job clamping & pedestal clamping is manual by tightening 4 bolts.
• The work centre height will be 920 mm approx.
• Safety guard will be provided to ensure of operator`s safety.
• Projection welding gun is provided with two heads, third head is optional.
• Safety ring supplied with the machine prevents flying of propeller shafts in 5 case of an accident.