Product Profile of Single Phase Servo Voltage Stabilizer

Single phase servo voltage stabilizer operates with the power range of 1 to 50 kva. Servo voltage stabilizer works with input voltage of 90 to 170v. Single phase servo voltage stabilizer has micro controller based control available in dry/air/oil type cooling.

Key Features of Single Phase Servo Voltage Stabilizer

• Digital ammeters and voltmeters for reading the input / output voltages and input / output current
• Enclosure shall be made of 2.5 mm MS sheet and finished with powder coating siemens grey
• Adequate exhaust fans to be provided in the stabilizer for dissipation of heat
• Air intake and exhaust sides to be fully covered with mesh screen
• Works with input voltage of 90 to 170V
• Operates with the power range of 1 to 50 kVa
• Micro controller based control available in dry/air/oil type cooling
• Provides 220 to 240V output voltage
• Output regulation is ±1%
• Auto/Manual switch shall be provided so that whenever the auto operation fails, the stabilizer can be put on manual operation using this switch
• High Voltage / Low Voltage cut off for each phase shall be provided with individual phase contactor
• Bypass switch of adequate capacity shall be provided
• Helps enable maintain the power supply to the facility whenever the stabilizer is under repair / maintenance
• Input and outputs shall be protected with a suitably rated 2 pole MCB controlling each phase