Product Profile of Phase Change Thermal Pads

Trocad Technologies Pvt. Ltd offers Phase Change Thermal Pads. Trocad Technologies Pvt. Ltd supplies Heat sink Compound, Thermal Pads, Phase Change Thermal Pads, Thermal Pads Flexible Tubes, T-Clips etc. The Phase Change Thermal Pads refers to the characteristics of the Thermal Compound used to transition or change to a fluid state and back to a solid state at predetermined temperatures. During the change to its fluid state the compound expands 15% in volume allowing it to move and wet both mounting surfaces and fill all interstitial voids between them. Phase Change Thermal Pads eliminates air pockets, allowing maximum heat transfer.

The technical features of Phase Change Thermal Pads are as follows:

• Part prefix code: T-250

• Thickness [mm]: 0.076

• Thermal Impedance: [°C-in²/W] .20

• Thermal Conductivity: [W/m-K] 0.45

• Dielectric Strength, VAC/mil[min]: 2200

• Tensile Strength PSI AT 23°C: 18000

• Volume Resistively, ohm-cm at: 200°C 10

• Dielectric Constant at 1 kHz: 4.2

• Cut-through Resistance [lbs]: 40