Accurate Machine Tools manufactures Heavy Duty Lathe Machines. Accurate Machine Tools are registered with National Small Industrial Corporation [NSIC], Rajkot Engineering Association and Machine Tools Manufacturing Association. Heavy Duty Lathe Machines are composed of bed, head strock, saddle, apron and tail stock.
The bed of the Heavy Duty Lathe Machines are deep in section and made of graded cast iron with diagonal webs to withstand torsional strains. The bed is strongly braced with cross ribs which provide a rigid frame work to the lathe so that the initial accuracy of the lathe is maintained throughout its life. This is also provided with gap bed. The headstock is of cone pulley type and the spindle pulley with GM Bushing. The spindle is of EN-8 steel of high tensile strength, Hardened and Ground having threaded nose running in plain parallel lead bonze bearings. The saddle of the Heavy Duty Lathe Machines is mounted on invert V and flat ways of the bed and thus the carriage has a long bearing on tebed. This carries the cross slide and the compound rest with square tool post. The operating screws are fitted with micrometer dials. Apron is of double walled designed with independent drive motion for feeds and screw cutting with interlocking arrangements. All gears and bearings and the worm are lubricated from the oil sump provided. The tail stock is mounted on inner V and flat ways of the bed with the hardened and ground spindle made from EN-B steel with internal grinding for dead centers and other tools. The Heavy Duty Lathe Machines possess several standard equipments like face plate, dog plate, centre adopter, 2 nos. Dead centers, tool post spanner, etc.
Technical specifications of Heavy Duty Lathe Machines are as follows: