Product Profile of Dry Cut Strand Pelletizer For Plastics And Polymers

Glaves Corporation offers Dry Cut Strand Pelletizer for Plastics and Polymers. Glaves Corporation is an ISO-9002 certified company. GCD Series Dry Cut Strand Pelletizer for Plastics and Polymers offer high productivity. They include low power consumption, as the high torque geared motors are used so that efficient cutting may be done with a lower rating motor which reduces power consumption considerably. Also due to direct drive on rotary cutter, there is no wastage of power due to slippage. The Dry Cut Strand Pelletizer has a rigid design. The cutter is both side supported with heavy duty bearings so that there are no vibrations in the assembly resulting in better gap setting, which in turn leads to better chip cutting and increased cutter life.

The other key features of Dry Cut Strand Pelletizer for Plastics and Polymers:

• The top roll is pneumatically pressed onto the strands so that an even pressure is maintained throughout the strand sheet

• The top elastomer roll is pneumatically cooled to improve upon its life. The amount of cooling may be controlled by a regulator provided for this purpose.

• Safety interlocks have been provided to ensure proper safety of workers

• Operator control panel is designed to provide maximum information to the operator