Product Profile of Solid Vibrating Fork Level Switch
Jaycee Technologies Pvt. Ltd. Offers Solid Vibrating Fork Level Switch. Jaycee Technologies Pvt. Ltd. Manufactures a range of level measuring instruments for industrial processes. The Solid Vibrating Fork Level Switch is fast and easy in installation with no calibration. The Solid Vibrating Fork Level Switch is suitable for the highly dusty environment.
Key Features of Solid Vibrating Fork Level Switch
- No effect of electrical properties of the service material. High Reliability.
- Field selectable operation logic. Can be configured either for High or Low Level point switching.
- Provides economical solutions. Various model not required. Reduces the inventory cost.
- Switching Unit:
- Housing: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting.
- Cable entry: 2 nos.
- Ambient temperature : 0 Degree C to +60 Degree C
- Power consumption : 2 VA
- Mains Voltage: 230/110 V AC [+/-15%], 50 Hz OR 24 V DC
- Output : 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
- Switching delay : Continuously adjustable From 1 to 20 sec. probe Free or probe covered.[Optional]
- Safety operation: Field selected switch over for min. or max. [FSL/FSH] switching points.
- Switch status display: Green LED shows Normal, Red LED shows alarm.
- Fork [Sensing Probe]
- Mounting : Screwed - 1 «" BSP [standard] Or Flanged [optional]
- Sense : Fork, Stainless steel
- Extension : Pipe
- Length: 250 [standard] up to 3000 mm and as per application.
- Operating Temp in [standard]: 150 deg for the integral switching vessel unit. 200øC [on request]
Product Specification of Solid Vibrating Fork Level Switch
- Ambient Temperature:Switching Unit: 0 to +60
- Cable entry:Switching Unit: 2 nos
- Extensions:Fork (Sensing Probe): Pipe
- Housings:Switching Unit: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting
- Length:250 (standard) upto 3000 mm and as per application.
- Mains Voltage:Switching Unit: 230/110 V AC (±15%), 50 Hz OR 24 V DC
- Mounting:Fork (Sensing Probe): Screwed – 1 1/2"BSP (standard) Or Flanged (optional)
- Operating Temperature:Fork( Sensing Probe): 150 deg for the integral switching vessel unit. 200°C (on request)
- Output:Switching Unit: 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
- Power Consumption:Switching Unit: 2 VA
- Safety operation:Switching Unit: Field selected switch over for min. or max. (FSL/FSH) switching points.
- Sense rod:Fork, Stainless steel
- Switch status display:Switching Unit: Green LED shows Normal, Red LED shows alarm.
- Switching Time:Switching Unit: Continuously adjustable From 1 to 20 sec. probe Free or probe covered.(Optional)
