Product Profile of Radio Frequency - RF Admittance Level Switch
Jaycee Technologies Pvt. Ltd. Manufactures Radio Frequency - RF Admittance Level Switch. Jaycee Technologies Pvt. Ltd. Offers various types of sensors for industrial processes. The Radio Frequency - RF Admittance Level Switch is a Point Level Switch
Comprises of a specially designed electronics and sensing probe using driven shield-coat guard circuit and corresponding 3-Element Probe. The Electro-mechanical combination of the coat guard technique makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The feature of the Radio Frequency - RF Admittance Level Switch is that the measured signal does not flow to the hopper wall through the probe in the backward
Direction but flows only through the material.
Key Features of Radio Frequency - RF Admittance Level Switch
- Three-Element Coat Guard Technology. Ignores material build-up on the probe: High Reliability.
- Fast and Easy Installation Simple Calibration.
- Suitable for the highly dusty environment.
- Field selectable operation logic. Can be configured either for High or Low Level point switching.
- Provides economical solutions. Various models not required. Reduces the Inventory cost
- Switching Unit:
- Housing: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting.
- Cable entry: 2 nos.
- Ambient temperature: 0 Degree C to +60 Degree C
- Power consumption: 1.9 VA
- Mains Voltage: 230/110 V AC [+/-15%], 50 Hz OR 24 V DC
- Output: 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
- Switching delay: Continuously adjustable From 1 to 20 sec. probe Free or probe covered. [Optional]
- Safety operation: Field selected switch over for min. or max. [FSL/FSH] switching points.
- Switch status display: Green LED shows Normal, Red LED shows alarm, Yellow LED shows power on condition.
- Coat Guard Sensing Probe
- Mounting: Screwed - 1 «" BSP [standard] Or Flanged [optional]
- Sense rod: Stainless steel
- Shield: Stainless steel
- Insulation: PTFE [standard] other on request and as per application.
- Operating Temp in: 100 deg for the integral switching vessel unit.225øC for remote switching unit.
Product Specification of Radio Frequency - RF Admittance Level Switch
- Ambient Temperature:Switching Unit: 0 to +60
- Cable entry:Switching Unit: 2 nos
- Housings:Switching Unit: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting.
- Insulation:Coast Guard Sensing Probe: PTFE (standard) Other on request and as per application.
- Mains Voltage:Switching Unit: 230/110 V AC (+/-15%), 50 Hz OR 24 V DC
- Mounting:Coat Guard Sensing Probe: Screwed - 1 1/2" BSP (standard) Or Flanged (optional)
- Operating Temperature:Coat Guard Sensing Probe: 100 deg for the integral switching vessel unit. 225°C for remote switching unit.
- Output:Switching Unit: 2 sets of potential free c/o contacts rated at 5 amps, 230 V AC for non-inductive loads.
- Power Consumption:Switching Unit: 1.9
- Safety operation:Switching Unit: Field selected switch over for min. or max. (FSL/FSH) switching points.
- Sense rod:Coast Guard Sensing Probe: Stainless steel
- Shield Type:Coast Guard Sensing Probe: Stainless steel
- Switch status display:Switching Unit: Green LED shows Normal, Red LED shows alarm, Yellow LED shows power on condition
- Switching Time:Switching Unit: Continuously adjustable From 1 to 20 sec. probe Free or probe covered. (Optional)
