Product Profile of Conductivity Level Switches With Power Consumption 1.9 Va
Jaycee Technologies Pvt. Ltd. Manufactures Conductivity Level Switches with Power Consumption 1.9 VA. Jaycee Technologies Pvt. Ltd. Offers various types of sensors for industrial processes. The Conductivity Level Switches with Power Consumption 1.9 VA are used in processing plants for conductive liquids of conductivity not less than 25 micro siemens in Food, Power, Chemicals, Sugar, Detergents, Steel, Minerals, Textiles, WTP and ETP etc. The Conductivity Level Switch with Power Consumption 1.9 VA are used for switching `off` pumps when tank is full, to avoid overflow for maintaining a constant level
To avoid material wastage For switching `off` pumps before running dry and indicating an empty tank to avoid wear and tear & production stoppage
Key Features of Conductivity Level Switches With Power Consumption 1.9 Va
- No moving part, free from maintenance.
- No special cable required for signal transmission, ECONOMICAL to install.
- Long cable connection permissible between probe and evaluation unit.
- AC on probes for prevention of electrolytic deterioration of electrodes.
- Low voltage on probe for operational safety.
- Two point action for automatic pump control.
- Two point independent switching.
- Three point switching, two points with pump control logic and one independent point
- Four point switching with two-pump control logic.
- Variety of probes available for various process conditions.
- Switching Unit:
- Housing: Aluminum, weather proof, powder coated. for back panel mounting /DIN Rail mounting
- Cable entry: 3 nos.
- Ambient temperature : 0 ø C to +60ø C
- Power consumption : 1.9 VA
- Mains Voltage : 230/110 V AC [+/-15%], 50 Hz or 24 V DC
- Output: 1 sets of potential free c/o contacts rated at 10 amps, 250 V AC for non-inductive loads.
- Safety operation: Field selected switch over for min. or max. [FSL/FSH] switching points.
- Switch status display: Green LED shows Normal, Red LED shows alarm.
- Response Time : 0.5 Sec
- Weight: 1.5 Kg Cast Al.
- Probe
- Housing: Cast Aluminium.
- Mounting : Screwed - 1 «" BSP [standard] or Flanged [optional]
- Sense Rod/s : Stainless steel
- Insulation: PTFE [standard] other on request and as per application.
- Operating Temp: 200 deg max in vessel
- Voltage on the: 12 V AC max. [Across probe & probe. tank wall]
- Current : less than 3 mA [between probe & tank wall through liquid]
- Back
Product Specification of Conductivity Level Switches With Power Consumption 1.9 Va
- Ambient Temperature:0°Cto +60°C
- Cable entry:Switching Unit: 3 nos.
- Current:Probe: < 3 (between probe & tank wall through liquid)
- Housings:Switching Unit: Aluminum, weather proof, powder coated. for back panel mounting /DIN Rail mounting
Probe: Cast Aluminium.
- Insulation:Probe: PTFE (standard) Other on request and as per application.
- Mains Voltage:Switching Unit: 230/110 V AC (±15%), 50 Hz or 24 V DC
- Operating Temperature:Probe: 200 deg max in vessel
- Output:Switching Unit: 1 sets of potential free c/o contacts rated at 10 amps, 250 V AC for non-inductive loads.
- Power Consumption:Switching Unit: 1.9 VA
- Safety operation:Switching Unit: Field selected switch over for min. or max. (FSL/FSH) switching points.
- Sense rod:Stainless steel
- Switch status display:Switching Unit: Green LED shows Normal, Red LED shows alarm.
- Switching Time:0.5 Sec
- Voltage:12 Max (Across probe & probe. tank wall)
- Weight:Switching Unit: 1.5 Cast Al
